Produse pentru aprindere automată (11)

Aufgrund ihrer Abmessungen sowie der Kontaktvielfalt können die IN62-Schalter in nahezu jeder industriellen Anwendung zur sicheren Positionsüberwachung eingesetzt werden. Nur mit Stößel-Betätigungseinrichtung erhältlich. Normschalter nach DIN EN 50047 Höchste Zuverlässigkeit bei geringen Strömen (1 mA) Schutzart IP67 Klappbarer Rastdeckel Schutzniveau:IP67 Weitere Eigenschaften:Sicherheit,Kuppenstößel Bereich:für Industrieanwendungen

On requst: Very cost-effective potentiometric rotary sensor with integrated plug

Entspricht den aktuellsten internationalen Normen: ISO 5211 Kompakt gebaut mit modernem Design Kolben und Endkappen aus druckgegossenem Aluminium Vorkomprimierte Lastfeder verspricht sichere Montage- und Demontagevorgänge Hohe Festigkeit

Compatto, robusto, economia di spazio e circuito leggero, non intercambiabile e breve - prova, alloggio fatto di di alluminio, anche disponibile come circuito stampato senza alloggio CARATTERISTICHE — Specialmente economia di spazio e peso leggero — Uscita di tensione 0… ± 10 V — Progettato come amplificatore di misurazione in-linea — circuito Non intercambiabile e breve - prova Tipo:di tensione Funzione secondaria:di misura Altre caratteristiche:con uscita in tensione, in linea Più caratteristiche:per sensore estensimetrico, compatto

The LHP035 is a square linear solenoid in a robust steel housing, which can be actuated either by pushing or by pulling. The solenoid convinces in various applications with smallest space requirement at high forces. The LHP035 series can be configured with different duty cycles (5, 25, 40 and 100% ED) and different stroke variants (5, 10, 15, 20 mm) depending on the application. The plug (= IP40), sealing ring and bellows (=IP54) ensure an increased degree of protection. Resetting can be performed by means of an optional integrated spring. Special voltage variants of the solenoid are also available on request. Due to its square design, particularly high forces and simple mounting characterize the high-performance linear solenoid. In addition, the strong solenoid convinces with short switching times and a long service life of up to 10 million switching cycles. The configuration options of the LHP035 are versatile. Nominal voltage:24 V Duty cycle:100 % Power consumption:23.78 W Stroke:10 mm Inital force:12.4 N End force:65 N Return spring:No Design:No  Protection class:IP 40 Thermal class:F 155 Connection:Leads / cable Solenoid weight:450 g Armature weight:110 g

Eje hueco continuo Ø 14 mm. Adaptación a diferentes recorridos de medición mediante un amplio espectro de transmisiones de engranajes. Forma constructiva compacta y económica. Salida de potenciómetro o de corriente. Montaje sencillo.

Thanks to their standard dimensions as well as the wide range of contacts, the IN62 switches can be used on safety facilities and for position monitoring in virtually any industrial application.Only available with plunger actuator. Standard switches conforming to DIN EN 50047 High reliability at low currents (1 mA) Protection class IP67 Hinged snap-on cover Protection level:IP67 Other characteristics:safety,with plunger Field:industrial

Entspricht den aktuellsten internationalen Normen: ISO 5211 Kompakt gebaut mit modernem Design Kolben und Endkappen aus druckgegossenem Aluminium Vorkomprimierte Lastfeder verspricht sichere Montage- und Demontagevorgänge Hohe Festigkeit

15 mm width, different electrical connection possibilities. Manual override optional, offered as rotary knob to be adjusted via flat-tip screwdriver or as "paddle" for the use without additional tools Function:3/2-way NC  Pressure range:2-8 bar Nominal orifice:2.6 mm Type of electric connection:Wire  Kv-value:3.2 l/min Size:15 mm Actuation type:elektrisch betätigt  Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1.0 W Nominal voltage:12 V DC Nominal current:83 mA Type of pneumatic connection:Flange  Returning mechanism:Spring  Protection class:IP51  Ambient temperature:-20... +60 °C Valve type:Poppet valve  Materials:Housing PBT, Seal NBR  Actuation:pilot controlled 

10 mm width, bistable latching solenoid valve or bistable 3/2-way solenoid valve which require only a short electrical power pulse to change the state. On request other sealing materials like EPDM or FKM are possible. Function:3/2-way Bistable  Pressure range:0 - 10 bar Nominal orifice:0.5 mm Type of pneumatic connection:Flange  Kv-value:0.11 l/min Size:10 mm Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:2.9 W Nominal voltage:24 V DC Ambient temperature:-10 ... +50 °C Materials:Base: PBT, seal: NBR 

Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID. Time intervall:0.5 - 60 s  Function:3/2-way NC  Pressure range:1.5 - 8 bar Type of pneumatic connection:1/8 NPT  Product type:Timer  Mounting:Subplate  Medium:Compressed air, non lubricated  Ambient temperature:-10 ... +60 °C